News

Practical Rotordynamics for Real Machinery
Virtual Course (online)
September 30 – October 3, 2024

 

For engineers interested in rotordynamics training, we highly recommend Practical Rotordynamics for Real Machinery, September 30 – October 3, 2024. This extremely popular course has been presented in person and online more than 20 times during the past 12 years.

To learn more about this virtual course and to register, go to https://www.rotordynamicscourse.com.

This popular course will be team-taught by three world class experts in rotordynamics and Dyrobes.

Each of the three experts will focus on a particular area of expertise.

Lateral Rotordynamics
Malcolm Leader, P.E., President, Applied Machinery Dynamics

Malcolm has long been known as one of the best rotordynamicists in the world and is also well-known for his keen troubleshooting abilities. He has written several dozen papers on these topics.

Bearings
Dr. Erik Swanson, P.E., President, Xdot Bearing Technologies

In addition to traditional fluid-film bearings, Erik is well-known for his expertise in foil and magnetic bearings. All of Erik’s presented case studies have been done using Dyrobes.

Torsional Vibration
Mark A. Corbo, P.E., President, No Bull Engineering

In addition to having authored some of the best-received papers on the subject, Mark is currently serving as the Chair for the Torsional section of the API 684 rotordynamics tutorial.

Here are some of the topics that will be addressed:

1. Fundamentals/Basics
2. Relevance of the various topics (i.e., why do we even care about this?)
3. Modeling tips
4. Undamped critical speed maps
5. Unbalance response analysis
6. Rotordynamic instability
7. High pressure compressor stability analysis
8. Pump rotordynamic considerations
9. Fluid-film bearing types
10. Tilting-pad bearings
11. Specialized bearings (i.e., magnetic bearings, foil bearings, etc.)
12. Seals
13. Undamped torsional analysis
14. Torsional Campbell diagrams
15. Variable frequency drives
16. Torsional response analysis
17. Synchronous motor start-up analysis
18. Reciprocating machine torsionals
19. Machinery specific considerations
20. API specifications and compliance
21. Case studies

The course, which will cover all of the above topics, will run from Monday through Thursday (30 September to 3 October) and cost $2950 per participant. In order to provide the best compromise for attendees in all time zones, the course will start at 10:00 AM Eastern time and run to about 7:00 PM. There will be a half hour break for lunch and we will take a short (5-7 minutes) break each hour. Additionally, we will ensure that there will be plenty of time for informal interaction with all three instructors, including breaks and lunches.

Some of the benefits you will receive from taking this course include:

1. A greater familiarity with lateral and torsional rotordynamics which will allow you to communicate more effectively with experts in the field.

2. A better understanding of the meaning and validity of rotordynamic results obtained from consultants and/or in-house rotordynamic codes.

3. A better understanding of the rotordynamic causes of common rotating equipment problems which will assist you when trying to troubleshoot field and test-stand problems.

4. A better feel for which system elements play an important role in rotordynamic behavior and which ones have little impact. This will be valuable when evaluating potential design changes.

5. An appreciation that rotordynamic analysis can be performed in a practical and timely manner and does not require a “research project.”

6. An appreciation for the large role that rotordynamic behavior plays in the reliability of rotating equipment and for the importance of evaluating that behavior in the design stage.

To register, all you need to do is go to www.rotordynamicscourse.com.

As always, if you have any questions about Dyrobes rotordynamics software, or would like a free trial copy, please contact us.